Model | Volumetric Displacement ( cm3/rev ) | Input Flow at n = 2000r.p.m. | Torque at = 2000r.p.m. | Power Output at = 2000r.p.m. | |||
Theoretical | at 175 bar ∆p | at 175 bar ∆p | at 175 bar ∆p | ||||
( l/min ) | ( l/min ) | ( in.lbs ) | ( Nm ) | ( HP ) | ( kW ) | ||
153 | 158.5 | 316.4 | 343.0 | 3522.0 | 398.0 | 111.8 | 83.4 |
185 | 191.6 | 382.5 | 409.0 | 4283.2 | 484.0 | 136.0 | 101.4 |
214 | 222.0 | 443.4 | 470.0 | 5017.7 | 567.0 | 159.3 | 118.8 |
Typical : 24cSt
Max. Pressure ( kgf/cm2 ) | Max. Speed ( r.p.m. ) | Mounting Standard ( SAE J477c ISO/3019-1 ) | Option for Inlet & Outlet Port ( SAE 4-bolt SAE threaded J781c ISO/DIS 6162-1 ) | Moment of Inertia | Weight | |
lbsin2 | Kg m2 x 10-4 | |||||
175 | 3600 | SAE C | 2” | 20.0 | 58.7 | 44.6 |
Speed ( r.p.m. ) | |||||||||
500 | 1000 | 2000 | 3000 | 3600 | |||||
psi | bar | psi | bar | psi | bar | psi | bar | psi | bar |
20 | 1.4 | 40 | 2.8 | 75 | 5.2 | 160 | 11 | – | – |
Model | Max. Pressure ( bar ) | |||||
HF-0 HF-2 | HF-2A | HF-1 | HF-3 HF-5 | HF-4 | ||
SVM4E SVM4E1 | 153 | 175 | 175 | 140 | – | – |
185 | ||||||
214 | ||||||
SVM4SE SVM4SE1 | 153 | 190 | 175 | 140 | 140 | 140 |
185 | 180 | |||||
214 | 175 |
Operating Pressure Range Drain ( bar ) | Max Speed for Low Loaded Condition *1 ( r.p.m. ) | Max. Speed for Max. Pressure Ratings ( r.p.m. ) | |||||
HF-0, HF-2 | HF-2A | HF-1 | |||||
Cont. | Int *2 | Cont. | Int *2 | Cont. | Int *2 | ||
3.5 | 3600 | 2500 | 3000 | 2500 | 2800 | 1800 | 2200 |
*1. Low loaded condition 35 bar for SVM4E series, 80 bar max. for SVM4SE.
*2. Intermittent speed – Don’t exceed 6 second per minute of operation.
HF-0, HF-2 = antiwear petroleum base.
HF-2A = crankcase.
HF-1 = new antiwear petroleum base.
HF-3 = water in oil emulsion.
HF-5 = synthetic fluids.
HF-4 = water glycols.
Interal drain : all these motors may be equipped with internal drain. Then the model numbers will be SVM4E1, SVM4SE1.
- SVM4E – 214 – 1 N 00 – B 5 02 *
a – b – c d e – f g h i- Model Name :
- SVM4E : external drain
- SVM4E1 : internal drain, drain port is plugged
- SVM4SE : external drain, severe duty motor
- SVM4SE1 : internal drain, severe duty motor, drain port is plugged
- Torque:
- 153, 185, 214
- Shaft Type :
- 1:keyed SAE C
- 3:spline SAE C
- Rotation :
- N:bi-directional
- Porting Combination :
- 00:standard
- Design Number : B
- Seal Class :
- 5:S5
- Port Connections :
- 01:SAE threaded port, SAE drain
- 02:SAE 4-bolt flange, UNC threaded – SAE drain
- 04:SAE 4-bolt flange, UNC threaded – BSPP drain
- Modifications : *
- Model Name :
PORTING COMBINATION
SYMBOLS
CURVES