PA10VSO

MODEL SPEC

Model	Max. Pressure ( kgf/cm² )	Rated Pressure ( kgf/cm² )	Max. Output ( l/min )
PA10VSO18	350	280	59
PA10VSO28			84
PA10VSO45			117
PA10VSO71			156
PA10VSO100			200
PA10VSO140			252

Model	Speed ( r.p.m. )		Power ( kw )	Troque ( Nm )	Weight ( kg )
Model	Vg max.	Vg<Vg max.	at Δp = 280 bar at nnom, Vg max	at Δp = 280 bar Vg max	(without through drive)
PA10VSO18	3300	3900	28	80	12
PA10VSO28	3000	3600	39	125	15
PA10VSO45	2600	3100	55	200	21
PA10VSO71	2200	2600	73	316	33
PA10VSO100	2000	2400	93	445	45
PA10VSO140	1800	2100	118	623	60

ORDER CODES

PA10VSO 45 DFLR / 31 R – V P A 12 N00
a b c / d e – f g h i j
1. Model Name : PA10VSO
2. Displacement : 18, 28, 45, 71, 100, 140
3. Control Device : DG, DR, DFR, DFR1, DRG, DFLR
4. Series: 31
5. Direction of Rotation :
  1. R: clockwise
  2. L: counter Clockwise
6. Seal Option :
  1. V: viton
  2. P: NBR
7. Shaft Type :
  1. S: splined shaft ANSI B92.1a – standard shaft
  2. R: splined shaft ANSI B92.1a – similar to shaft “S” however for higher input torque
  3. U: splined shaft ANSI B92.1a – reduced diameter, not for the through drive
  4. P: parallel keyed shaft DIN 6885 – metric Din 6885
  5. K: parallel keyed shaft DIN 6885 – SAE ISO 3019-1
  6. P: NBR
8. Mounting Flange :
  1. A: ISO 3019-2 (Metric) 2 bolt
  2. B: ISO 3019-2 (Metric) 4 bolt
  3. C: ISO 3019-1 (SAE) 2bolt
  4. D: ISO 3019-1 (SAE) 4 bolt
9. Service Line Port :
  1. 12: SAE flange port metric fastening thread
  2. 42: SAE flange port metric fastening thread
  3. 62: SAE flange port UNC fastening thread
  4. 92: SAE flange port UNC fastening threadB: ISO 3019-2 (metric) 4 bolt
10. Through Drive :
  1. N00: without through drive
  2. K01: 82-2 (A), 5/8 in 9T 16/32DP
  3. K52: 82-2 (A), 3/4 in 11T 16/32DP
  4. K68: 101-2 (B), 7/8 in 13T 16/32DP
  5. K04: 101-2 (B), 1 in 15T 16/32DP
  6. K07: 127-2 (C), 1 1/4 in 14T 12/24DP
  7. K24: 127-2 (C), 1 1/2 in 17T 12/24DP
  8. K17: 152-4 (D), 1 3/4 in 13T 8/16DP
  9. K57: Ø63, metric 4-hole, shaft key Ø25
  10. KB2: flange ISO 3019-2 diameter 80, 2-hole, 3/4 in 11T 16/32DP
  11. KB3: flange ISO 3019-2 diameter 100, 2-hole, 7/8 in 13T 16/32DP
  12. KB4: flange ISO 3019-2 diameter 100, 2-hole, 1 in 15T 16/32DP
  13. KB5: flange ISO 3019-2 diameter 125, 2-hole, 1 1/4 in 14T 12/24DP
  14. KB6: flange ISO 3019-2 diameter 125, 2-hole, 1 1/2 in 17T 12/24DP
  15. KB7: flange ISO 3019-2 diameter 180, 4-hole, 1 3/4 in 13T 8/16DP

DOCUMENTATION

SYMBOLS

PA10VSO

Information

Company Information